| 加工定制 | 否 | 品牌 | QIOPTIQ | 型号 | iFLEX-Viper |
| 种类 | 激光引擎 |
The iFLEX-Viper™ is a solid-state multi-line laser source with detachable single-mode polarization maintaining fiber output. Up to five individual lasers are efficiently combined and delivered through one SM PM fiber. The system is mode-hop free and wavelength stabilized as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.
Key features:
- · Output Beam – Combined, Co-axial, Gaussian
- · No laser alignment required
- · Laser performance guaranteed after fiber
- · Fully independent laser control for power adjustment and modulation; set lasers to emit in any sequence, any pairing or simultaneously
- · True Off for each wavelength. Mechanical shutter included on 50mW 532 & 561nm lines
Benefits include:
- · No laser alignment required
- · Easy to use, portable, turnkey system
- · Class leading power stability
- · Ultra-low noise performance
- · Class leading beam pointing stability
- · Reliable and repeatable measurements
Options:
- · Select up to 5 wavelengths from 405 - 640nm
- · Select output power levels required
- · kineFLEX® fiber options to fit any microscope
- · Upgrade option to add wavelengths
- · USB comms. interface for software control
- · OEM custom and CDRH compliant versions
iFLEX-Viper™ Specification Overview
波长（nm） | 640± 5 | 561± 2 | 532± 2 | 515±2 | 488± 2 | 445± 5 | 405± 5 | |||||||||||||
命名 | R | Y | G1 | G | B | I | V | |||||||||||||
光纤后功率（mW） | 20 | 50 | 20 | 50 | 20 | 50 | 20 | 40 | 20 | 50 | 20 | 50 | 20 | 50 | ||||||
RYBV-标准系统 |
| |||||||||||||||||||
低功率iFLEX-Viper-RYBV | • |
| • |
| ◊ |
| ◊ |
| • |
| ◊ |
| • |
| ||||||
大功率iFLEX-Viper-RYBV |
| • |
| • |
| ◊ |
| ◊ |
| • |
| ◊ |
| • | ||||||
YGBI-标准系统 |
| |||||||||||||||||||
低功耗iFLEX-Viper-YGBI | ◊ |
| • |
| ◊ |
| • |
| • |
| • |
| ◊ |
| ||||||
大功率iFLEX-Viper-YGBI |
| ◊ |
| • |
| ◊ |
| • |
| • |
| • |
| ◊ | ||||||
噪声rms（20Hz~2MHz） | 通常< 0.3% | |||||||||||||||||||
功率稳定性（8小时） | < 2 % | |||||||||||||||||||
空间模式、TEM00、M2 | 通常M2<1.1，衍射极限 | |||||||||||||||||||
光纤后指向稳定性 | < 1 μrad/oC | |||||||||||||||||||
偏振消光比 | ≥100:1 | |||||||||||||||||||
最大基板温度 | 40 oC | |||||||||||||||||||
CW功率调节（每λ）％ | 0, 0.1-100% | 0, 0.1-100% | 0, 0.1-100% | 0, 0.1-100% | 0, 0.1-100% | 0, 0.1-100% | 0, 0.1-100% | |||||||||||||
模拟调制（每λ） | 0–5 V | 0–5 V | 0–5 V | 0–5 V | 0–5 V | 0–5 V | 0–5 V | |||||||||||||
带宽 | 直流至2MHz，超过3dB带宽频率 | |||||||||||||||||||
动态范围 | ≥30 dB | |||||||||||||||||||
上升/下降时间(10-90％) | ≤350 ns | |||||||||||||||||||
激光头尺寸 | 455mm (L) x 335mm (W) x 84mm (H) | |||||||||||||||||||
控制器尺寸 | 370 mm（L）×322 mm（W）×85 mm（H）（或H = 91 mm，加上机器脚的高度） | |||||||||||||||||||
