产品参数
项目(Item) |
参数(Parameter) |
项目(Item) |
参数(Parameter) |
柴油机型号 Engine Model |
WP6G175E201(6缸,气缸直径108mm) |
钎杆直径(mm) Drill rod diameter |
75 |
柴油机功率(kw) Engine Power |
129 |
打桩钎帽中心伸出车架最大距离(mm) Pile Brazing Cap Center Extends The Maximum Distance Of The Fram |
500 |
空压机形式 Air compressor form |
螺杆式screw |
钻头中心伸出车架最大距离(mm) The maximum distance of the drill center over the frame |
360 |
变速箱 Transmission |
自动挡 automatic |
工作装置倾斜角度(°) Tilt Angle Of Working Device |
前倾30°,后倾20° |
钻孔直径(mm) The hole diameter |
≤φ200 |
驾驶楼配置 Cab Configuration |
标配(带空调) Standard with Air conditioner |
钻孔深度(mm) Drill hole depth |
1800 |
行走装置 Driving system |
四轮驱动 Four Wheel Drive |
空压机空气压力(kg) Air Pressure Of Air Compressor |
13 |
轮胎型号 tyres spec |
23.5/70-16 |
空压机空气排风量(m³/min) Air Discharge Capacity Of Air Compressor |
10 |
轮胎压力(Kg/cm2) tyre Pressure |
<3.5 |
动力头输出最大扭矩(N/m) Power Head Output Maximum torque |
2000 |
刹车配置 Brake system |
碟刹+断气刹 Disc + Automatically Air-cut Brake |
液压系统流量(ml/r) Hydraulic system Flow |
120 |
爬坡角度(max)Climbing angles |
≤30° |
液压系统额定压力(mpa) Hydraulic system Rated Pressure |
20 |
最小转弯半径R(mm) Minimum turning Radius |
6300 |
液压锤冲击频率(bpm) Hydraulic Hammer Impact Frequency |
500-900 |
最大牵引速度(km/h) Maximum traction speed |
20 |
液压锤工作压力(Mpa) Hydraulic Hammer Working Pressure |
16 |
液压油箱尺寸(mm) Hydraulic tank size |
720*350*860 |
液压锤离地最大高度(mm) Maximum height of hydraulic hammer above ground |
2950 |
外形尺寸(长*宽*高)mm Overall dimensions (length * width * height) |
5800*2100*3000 |
液压锤冲击力(t) Hydraulic Hammer Impact Force |
7-14 |
整机质量(Kg) The whole machine quality Machine Weight |
6800 |
液压锤重量(kg) Hydraulic Hammer Weight |
275 |
吸尘装置 Dust collection Device |
选配 Optional |
打桩速率(m/min) Piling rate |
2.5 |
反打装置 The playing device |
标配 Standard |
注:以上参数仅供参考,实际参数请与销售联系