| 规 格 说 明 书 |
| Specifications |
| |
|
|
|
|
|
|
|
|
| 3、机构 Mechanical |
| 3-1、外观尺寸 External dimension |
120*120*38 MM |
| 3-2、重量 Weight |
520g(lead wire 80mm& without connector) |
| 3-3、轴承 Bearing |
含油轴承sleeve bearing |
| 4、 电气特性 Electrical characteristics(在通风及额定电压条件下 in free air at rated voltage) |
| 4-1、额定电压 Rated voltage |
220V |
| 4-2、额定电流 Rated current |
0.12±10%A |
| 4-3、额定输入功率 Rated input power |
15±10%W |
| 5、 效率 Efficiency |
| 5-1、风扇转数 Rated speed(范围 range) |
26500RPM±10% |
| 5-2、最大风量 Maximum air flow |
87CFM |
| 5-3、最大静压 Maximum static air pressure |
0.29Inch-H2O |
| 6、 特性规格 Characteristics |
| 6-1、 操作电压 Operating voltage range |
85--120V |
| 6-2、 起动电压 Staring voltage |
75V(ON/OFF) |
| 6-3、 锁定电流 Locked current |
0.145A(Reference) |
| 6-4、 操作温度 Operating temperature |
-10℃~+70℃ |
| 6-5、 储存温度 Storage temperature |
-30℃~+85℃ |
| 6-6、 环境湿度测试 Environment humidity |
10%(RH)45℃ for 24 hours & 98% (RH) 45℃ for 24 hours |
| 6-8、 绝缘阻抗强度 Insulation resistance |
在本体与两条导线间加 500V 直流电压之绝缘阻抗10MΩ以上 At least 10MΩ at 500 VDC between housing and both lead wires |
| 6-9、 绝缘耐压强度 Dielectric strength |
必须能抵抗在本体与两线间加 1800V 交流电压1分钟 1mA Withstand 1800 VAC 1 minute 1mA between housing and both lead wires |
| 6-10、预期寿命(MTBF)：指在额定电压及正常温度，湿度条件下连续运转。 |
| Life ecpectance:continuous operation at rated voltage and normal temperature & humidity |
| 6-10-1、含油轴承寿命：20000小时 |
| Sleeve bearing life expectance:20000Hours |
| 6-10-2、双滚珠轴承预期寿命：50000小时 |
| Two balls bearing life expectance:50000Hours |
| 6-11、端子抗拉强度 Tensible strength of connector |
端子以1公斤的拉力拉扯15秒不会脱落 |
| Connector will not be any broken at 1 Kg for 15 seconds per piece. |
| |
|
|
|
|
|
|
|
|
