英国进口MWA铸铁焊条Mac Cast E409|ENi-CI
Fully machinable nickel based electrode with specially developed non-conductive coating for welding most cast irons. Specially designed for use where awkward and confined spaces cause arcing difficulties. May be used for hot or cold welding of most types of cast iron.
非导电涂层，完全可加工的镍基焊条，可用于大多数类型铸铁的冷热焊接。特别设计用于尴尬和受限空间导致电弧焊接困难的地方。
Typical All Weld Metal Chemical Analysis (%)
典型全焊缝金属成分(%)
|
Mn |
Ni |
|
1.0 |
99.0 |
Typical All Weld Metal Mechanical Properties（As Welded）
典型全焊缝金属机械性能（焊态）：
Tensile Strength抗拉强度： 400 N/mm2
Elongation延伸率： 15%
Hardness硬度： 180 HB
Sizes Available and Recommended Amperages
尺寸Φ/电流：
|
2.5mm |
3.2mm |
4.0mm |
5.0mm |
|
50-80A |
90-110A |
110-140A |
140-180A |
Current电流：AC/DC (+)
Related Specification参考标准：AWS A5.11 ENi-CI Special Non-Conductive Coating
Storage储存：Electrodes should be stored in dry conditions. Should the electrodes become damp, re-dry for one hour at 150°C before use. 焊条应储存在干燥环境中。如果焊条受潮，应在150°C下重新干燥1小时后再使用。
